Direct drive mount and cable chain for Flying Bear Ghost 5.
Added a chain mount to the right part; thinned the left part to not interfere with X endstop, and added some volume on top of the lug as the original one broke on me after some prints with >100 mm/s speeds.
Need to print: Both crab parts ~17 chain links ~19 chain clips 1 chain link last (install it just before head) 1 chain start frame
Used parts from https://www.thingiverse.com/thing:4748509 | Download free and paid 3D printable STL files

This is a simple box for Ghost4 and Ghost4s.
In the beginning I want to say that I used the cable chain here https://www.thingiverse.com/thing:1760952, for which I thank the author.
Case and the door are easily removed for ease of maintenance.
The case has a place for fixing the backlight for the cable.
Case is made under 2mm thick plexiglass.
For assembly you will need the following parts:
-plexiglas 1000x500x2mm in size (leaving a small margin)
-screws:
-m3x10 50 pieces
-m3x16 4 pieces (not needed if you will not do the backlight)
-m3x8 2 pieces
-hairpin m3x100
-nuts m3 70 pieces
-m3 washers, outer diameter 9mm 140 pieces
-washers m3, outer diameter 7mm 6 pieces
-magnet d15x3 2 jokes
-several couplers
-LED strip 1 meter or slightly larger
The name of the models at the end says how many pieces need to be printed.
Это простой короб для Ghost4 и Ghost4s
В начале я хочу сказать, что использовал кабельную цепь вот эту https://www.thingiverse.com/thing:1760952, за что автору спасибо.
Кэйс и дверь легко снимаются…