This is a curtain rod holder and filament roll holders that shall hang on the curtain rod.
The filament holders shall be printed in pairs with one mirrored. Then use electric tube with 16mm diameter as an axis to keep them parallell.
The curtain rod holders shall also be printed in pairs, with one of them mirrored. I printed them without supports and ppeled away some of the filament that was hanging. Use support if you prefer.
The idea came from the guide at https://github.com/PrusaMK2Users/MK2_Tips_and_Tricks/wiki/IKEA-LACK-STUVA-enclosure but the liks were broken to some of the printable parts so I made some new ones.
I have also made 45 degree mounts for the led lightning: https://www.thingiverse.com/thing:2370649

See the official video:https://youtu.be/oS7ZtBNh2hE
Follow the Mikolas Zuza's tutorial article on:https://www.prusaprinters.org/cheap-simple-3d-printer-enclosure/
Plexiglass dimensions:
3pcs: 440 x 440 mm, thickness 3mm
2pcs: 220 x 440 mm, thickness 3mm
NOTE:
Adjustable spool holder STL file may not be adjustable due to the pieces melting together. • Check the gcode preview after slicing and make sure, there is a gap between the two pieces.
• Otherwise, slice with a different layer height.
• Or split the model into objects and print pieces separately.
Alternatively, check the REMIXes section and find an already modified file: https://www.thingiverse.com/thing:2864118/remixes
p.e.https://www.thingiverse.com/thing:3035871https://www.thingiverse.com/thing:2990450https://www.thingiverse.com/thing:2878385https://www.thingiverse.com/thing:3556050https://www.thingiverse.com/thing:4180194
Good luck!
http://www.dominikcisar.czhttp://www.model3D.cz
...........................
People were asking, where they can buy the…