G90
M82
M106 S0
M104 S200 T0
M109 S200 T0
M140 S65
M105
M190 S65
G28 ; home all axes
G29
G92 E0 ; Reset Extruder
G1 Z10 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed
G1 X2 Y10 Z10 F5000.0 ; Move to heating pre-position
G1 X2 Y10 Z0.3 F5000.0 ; Move to heating position
M104 S200
M109 S200
G1 X0.7 Y20 Z0.3 F5000.0 ; Move to start position
G1 X0.7 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line
G1 X1.0 Y200.0 Z0.3 F5000.0 ; Move to side a little
G1 X1.0 Y20 Z0.3 F1500.0 E30 ; Draw the second line
G92 E0 ; Reset Extruder
G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed
G92 E0
G1 F1800 E-4
G92 E0