Originally designed as a screw box, I decided it could have many other uses by making different bin and size combinations. I plan to make a stacking system later on plus other bin designs and box variations.
The chamfered top of the bins makes it easy to pick them out and also can be used to put a label on it.
The only assembly needed is to insert a length of 1.75mm filament in the hinge holes to join the top and bottom parts.
The drill bit index works for 3.17mm drill bits, also assembled by using filament as hinge pins.
**Update 16 January 2020'''
-Added Bin_SpoolA_38x38.stl, Bin_SpoolB_38x38.stl, Bin_SpoolC_38x38.stl and Bin_SpoolD_38x38.stl which together make a wire spool the size of a 38x38 bin, very handy. You will need to glue the two halves of the spool and the top is attached with two m2x6mm flat head screws.
Update 12 February 2018
-By request I added a second version for all the box bottoms with no printing pads also a version without pads for the rack sides Rack_5b5x4_Left_NoPads and Rack_5b5x4_Right_NoPads.…