0.0.0.0/1 via 10.255.252.1 dev kvnet proto unspec metric 1 onlink

suuuuuuka

кста что-то новое

ниче нового ты крот ебучий

соси хуй жирничь

я жилистый, не пизди

Поясню: узкий диапазон имеет приоритет над болле широким

0.0.0.0/1 уже default (0.0.0.0/0)

Так что впн должен юзаться по дефолту

Зря галку ставили

Christian Rebischke: Bandwidth tests with iperf3

If you ever come to the need of a simple bandwidth test for your server or client, you can setup a bandwidth test via iperf3.For starting an iperf3 server, just use iperf3 -s:

❯ iperf3 -s-----------------------------------------------------------Server listening on 5201-----------------------------------------------------------Accepted connection from 139.174.228.245, port 33133[ 5] local 78.46.124.83 port 5201 connected to 139.174.228.245 port 21516[ ID] Interval Transfer Bitrate Retr Cwnd[ 5] 0.00-1.00 sec 12.1 MBytes 101 Mbits/sec 354 567 KBytes[ 5] 1.00-2.00 sec 10.0 MBytes 83.9 Mbits/sec 209 993 KBytes[ 5] 2.00-3.00 sec 8.75 MBytes 73.4 Mbits/sec 58 913 KBytes[ 5] 3.00-4.00 sec 7.50 MBytes 62.9 Mbits/sec 156 1.18 MBytes[ 5] 4.00-5.00 sec 11.2 MBytes 94.4 Mbits/sec 144 781 KBytes[ 5] 5.00-6.00 sec 7.50 MBytes 62.8 Mbits/sec 72 987 KBytes[ 5] 6.00-7.00 sec 7.50 MBytes 63.0 Mbits/sec 50 583 KBytes[ 5] 7.00-8.00 sec 3.75 MBytes 31.5 Mbits/sec 0 662 KBytes[ 5] 8.00-9.00 sec 3.75 MBytes 31.5 Mbits/sec 5 351 KBytes[ 5] 9.00-10.00 sec 6.25 MBytes 52.4 Mbits/sec 49 885 KBytes- - - - - - - - - - - - - - - - - - - - - - - - -[ ID] Interval Transfer Bitrate Retr[ 5] 0.00-10.08 sec 78.3 MBytes 65.2 Mbits/sec 1097 sender-----------------------------------------------------------Server listening on 5201-----------------------------------------------------------^Ciperf3: interrupt - the server has terminated

Now you can test your client against your server via iperf3 -R -c <hostname>, where -R means reverse mode (the server sends data to your client). If you want to test the opposite way, just use iperf3 -c <hostname> or iperf3 --bidir -c <hostname> for a bidirectional connection:

❯ iperf3 -R -c kurisuConnecting to host kurisu, port 5201Reverse mode, remote host kurisu is sending[ 5] local 192.168.0.103 port 55182 connected to 78.46.124.83 port 5201[ ID] Interval Transfer Bitrate[ 5] 0.00-1.00 sec 8.59 MBytes 72.0 Mbits/sec[ 5] 1.00-2.00 sec 11.0 MBytes 92.1 Mbits/sec[ 5] 2.00-3.00 sec 8.23 MBytes 69.0 Mbits/sec[ 5] 3.00-4.00 sec 8.23 MBytes 69.1 Mbits/sec[ 5] 4.00-5.00 sec 10.1 MBytes 84.5 Mbits/sec[ 5] 5.00-6.00 sec 7.65 MBytes 64.2 Mbits/sec[ 5] 6.00-7.00 sec 7.01 MBytes 58.8 Mbits/sec[ 5] 7.00-8.00 sec 4.60 MBytes 38.6 Mbits/sec[ 5] 8.00-9.00 sec 4.18 MBytes 35.1 Mbits/sec[ 5] 9.00-10.00 sec 5.96 MBytes 50.0 Mbits/sec- - - - - - - - - - - - - - - - - - - - - - - - -[ ID] Interval Transfer Bitrate Retr[ 5] 0.00-10.08 sec 78.3 MBytes 65.2 Mbits/sec 1097 sender[ 5] 0.00-10.00 sec 75.5 MBytes 63.3 Mbits/sec receiveriperf Done.

https://nullday.de/posts/bandwidth-tests-with-iperf3/

via @planetarch

Ребишке

шо ты хочешь, дорогой?

Могут ли разные программы слушать один порт?

🤔

Понял, спасибо

Разбирался с жабасокетами, лёг поспать, задумался...

)

?

Есть такое