EDIT: So this mod may actually require a 24V or 110V bed to work. I'm finding that on my setup even 50% fan speed is enough to cool the bed over time from 75 C.
EDIT3: I've thrown together a manifold which joins the blower outputs and produces a vortex of air under the nozzle. It needs some shaving to fit the blowers, but it fits the printer really nicely. My test with it showed my bed really can't maintain 70 C with over 40% fan speed. Now that's what I call cooling! V2 of the manifold has a different opening geometry which I haven't tested. Use at your own risk.
OG Post: This is an add-on for part #2512203 which is an E3D V6 mount for the CR-10. My part is only the 5015 brackets and the mount from part #2512203 will be needed as well.
I decided the 40mm fans from part #2512203 just weren't enough so I made these brackets to replace them with a pair of 5015 blowers.
This mod enables cooling capabilities so intense your heated bed might not be able to maintain temperature. An insulated hotend is a must and an…

5015 cooler mount for hex E3d V6
You can remake this mount for yourself by downloading it in the format you need from the link: https://a360.co/2DaGGdC
I typed from PLA. Air flow is enough for cooling and that PLA did not flow.
You don't need to use support when printing. Red zones are specially made for printing without using supports. Then you will need to delete them. I do it with a scalpel.
Update:
31.01.2020 - fixed the location of the cooler mounting hole to the mount.
Крепление кулера улитки 5015 для шестигранного Е3d V6
Вы можете переделывать это крепление под себя скачав его в нужном для вас формате по ссылке: https://a360.co/2DaGGdC
Я печатал из PLA. Воздушного потока хватает для охлаждения и чтоб PLA не тек.
При печати не нужно использовать поддержки. Красные зоны специально сделаны для печати без использования поддержек. Потом их нужно будет удалить. Я это делаю скальпелем.
Обновление:
31.01.2020 - исправлено расположение отверстия крепления кулера к креплению.