[H3C]display l2vpn ldp verbose
Peer: 10.10.15.210     PW ID: 203
  Xconnect-group: l2vpn
  Connection    : l2
  PW State      : Up
  PW Status Communication: Label withdraw method
  PW Preferential Forwarding Status Bit: Process
  PW ID FEC (Local/Remote):
    PW Type     : Ethernet/Ethernet
    Group ID    : 0/0
    Label       : 65662/43
    Control Word: Disabled/Disabled
    VCCV CV Type: LSP Ping/LSP Ping, BFD, Raw-BFD
    VCCV CC Type: -/Control-Word, Router-Alert, TTL
    Flow Label  : -/-
    MTU         : 1600/1600
    PW Status   : PW forwarding/PW forwarding


root@bng> show l2circuit connections neighbor 10.10.15.203
Layer-2 Circuit Connections:
Legend for interface status
Up -- operational
Dn -- down
Neighbor: 10.10.15.203
    Interface                 Type  St     Time last up          # Up trans
    ps3.0(vc 203)             rmt   Up     Apr 19 18:27:43 2021           1
      Remote PE: 10.10.15.203, Negotiated control-word: No
      Incoming label: 43, Outgoing label: 65662
      Negotiated PW status TLV: No
      Local interface: ps3.0, Status: Up, Encapsulation: ETHERNET
      Flow Label Transmit: No, Flow Label Receive: No

root@bng# show interfaces ps3
description H3C-TEST;
anchor-point {
    lt-0/0/0;
}
flexible-vlan-tagging;
auto-configure {
    stacked-vlan-ranges {
        dynamic-profile svlan-profile {
            accept [ pppoe dhcp-v4 ];
            ranges {
                2050-2055,any;
            }
        }
    }
    vlan-ranges {
        dynamic-profile vlan-profile {
            accept pppoe;
            ranges {
                500-1000;
            }
        }
    }
    remove-when-no-subscribers;
}
mtu 1600;
unit 0 {
    encapsulation ethernet-ccc;
}

[edit]