This project is not personally mine, I just brought it to a working state and adapted it for CNC3018
All models of other people's projects are, to one degree or another, finalized, but about half of the models were developed by me personally and assembled into one new project.
The spindle for the turbine impeller is a RS550 but I recommend you use a more powerful motor.
If you have any questions, I suggest discussing them in the comments.
Links to originals of projects:https://www.thingiverse.com/thing:1914662https://www.thingiverse.com/thing:4462480https://www.thingiverse.com/thing:13188
08.02.2021
added nozzles for end fittings
15.02.2021
added dust bags of two more sizes
18.02.2021
the suction system has been modified, for a 38mm plumbing hose and an air flow divider box, as a result, the efficiency has almost doubled, the vacuum cleaner began to suck in fine fractions of chips and dust by 80% better
15.03.2021
updated parts of the suction, and tips so that there are as few parts as possible requiring purchase…