For grease lubrication, we recommend greases in accordance with DIN 51825 of consistency class  
NLGI 2 as specified by DIN 51818.  
For normal loads, standard greases with the designation " – K1K“ are sufficient.  
For higher loads (P/C < 15), high-pressure lubricating greases are required: "– KP1K“  
The use of greases of other consistency classes is possible subject to the approval of the lubricant  
supplier.  
NOTE  
Greases with solid particles such as graphite or MOS2 
 must not be used.  
The following information on lubricants serves to provide examples and is only intended as an aid  
to selection. Other lubricants may be selected after clarification of the specific application with the  
lubricant supplier.